Panasonic Projector ET DFD75 User Manual

S P E C

F I L E

Dual Stacking Mount Bracket

Description

ET-DFD75

This mount bracket is to be used when stacking two DLP™-based projectors.

Specifications

Dimensions (W x H x D):

Weight:

650 x 589 x 680 mm (25-9/16˝ x 23-3/16˝ x 26-3/4˝)

27 kg (59.5 lbs)

Weights and dimensions shown are approximate. Specifications subject to change without notice.

Digital Light Processing and DLP are trademarks of Texas Instruments.

Parts

Base frame . . . . . . . . . . . . . . . . . . . . .1

Guard frame . . . . . . . . . . . . . . . . . . . .2

Spring washers (M8) . . . . . . . . . . . . . .8

Allen hex socket bolts (M8) . . . . . . . . .4

Mounting nuts A (M8) . . . . . . . . . . . . . .4

Adjustment bolts (M8) . . . . . . . . . . . . .4

Flat washers A . . . . . . . . . . . . . . . . . .4

Flat washers B . . . . . . . . . . . . . . . . . .4

Mounting nuts B (M8) . . . . . . . . . . . . . .4

Flat washers (M4) . . . . . . . . . . . . . . . .4

Spring washers (M4) . . . . . . . . . . . . . .4

Hex nuts (M4) . . . . . . . . . . . . . . . . . . .4

Cable guide fitting . . . . . . . . . . . . . . . .2

Washer-fitted screws (M4 x 8) . . . . . .20

Spacers . . . . . . . . . . . . . . . . . . . . . . .10

Set mounting base A . . . . . . . . . . . . . .1

Set mounting base B . . . . . . . . . . . . . .1

Screws (M6) . . . . . . . . . . . . . . . . . . .10

Hex nuts (M8) . . . . . . . . . . . . . . . . . . .8

Flat washers (M8) . . . . . . . . . . . . . . . .8

Caution:

Mounting should be done by a qualified technician. Make sure that the mounting (ceiling) area has

sufficient strength. Read the enclosed mounting instructions thoroughly before starting.

Dimensions

650 (25.6˝)

The ET-DFD75 with two DLP™-based

projector mounted.

unit: mm (inch)

(Dimensions given in inches are approximate.)

Note: This illustration is not drawn to scale.

As of September 2004