NEC Computer Monitor LA 1422JMW User Manual

®
®
MultiSync  
LCD400V  
User’s Manual  
Contents  
Quick Start  
Controls  
1
2-3  
4-5  
Recommended Use 6-7  
Specifications  
Features  
8
9
Troubleshooting  
References  
Limited Warranty  
10  
11  
12  
78133331  
1
9/25/98, 12:46 PM  
 
Contents  
Your new NEC Technologies MultiSync® LCD monitor box* should  
contain the following:  
• MultiSync LCD400Vmonitor, LA-1422JMW, with tilt/swivel base  
• Power Cord  
• Video Signal Cable  
• User’s Manual  
• Registration Card  
MultiSync LCD  
400V  
MultiSync LCD400V  
monitor with Video Signal Cable  
NEC MultiSync Monitors  
Recve a $25  
Pur  
TION  
chaser Rebate  
to thank you fo
MultiSync  
choosing an  
NEC MultiSync  
LCD  
That’s right. Simply complete and return  
andLCD Monitorthis  
we’ll send the purchasing party  
check for $25.00 And we’ll also enter you in  
chance to win  
regisitration,  
a
User’s Manual  
400V  
our “100,000 Give Away II” for  
a
®
Contents  
$5,000, $25,00 or $50,000! Thank Uou for your  
time, and thanks for  
choosing NEC.  
®
Quick Start  
Controls  
Recommended Use  
Specifications  
Features  
1
2-3  
Troubleshooting  
Reference  
4-5  
6-7  
8-9  
10  
11  
12  
13  
Give A  
way II  
Limited Warranty  
Power Cord  
PRODUCT REGISTRA  
SEE, HEAR AND FEEL THE DIFFERENCE.  
Users Manual  
Registration Card  
* Remember to save your original box  
and packing material to transport  
or ship the monitor.  
1
78133331  
3
9/25/98, 12:46 PM  
 
Quick Start  
To attach the MultiSync® LCD monitor to your system, follow these  
instructions:  
1. Turn off the power to your computer.  
2. For the PC: Connect the 15-pin mini D-SUB of the appropriate signal cable  
to the connector of the display card in your system (Figure A.1). Tighten all screws.  
For the Mac: Connect the MultiSync LCD400VMacintosh cable adapter to the computer  
(Figure B.1). Attach the 15-pin mini D-SUB end of the appropriate signal cable to the  
MultiSync LCD400V Macintosh cable adapter (Figure B.1). Tighten all screws.  
NOTE: To obtain the MultiSync LCD400V Macintosh cable adapter,  
call NEC Technologies at (800) 820-1230.  
3. Connect the 15-pin mini D-SUB of the video signal cable to the appropriate connector on  
the back of the monitor (Figure C1).  
NOTE: Incorrect cable connections may result in irregular operation, damage  
display quality/components of LCD module and/or shorten the module’s life.  
4. Connect one end of the power cord to the MultiSync LCD Series monitor and the other  
end to the power outlet (Figure D.1).  
5. Turn on the monitor (Figure E.1) and the computer.  
6. To complete the setup of your MultiSync LCD monitor, use the following OSMcontrols:  
• Auto Adjust Contrast  
• Auto Adjust  
Refer to the Controls section of this User’s Manual for a full description of these OSM controls.  
NOTE: If you have any problems, please refer to the Troubleshooting section of  
this User’s Manual.  
15-pin  
mini D-SUB  
15-pin  
mini  
D-SUB  
Mac Adapter  
(not included)  
Figure A.1  
Figure B.1  
2
78133331  
4
9/25/98, 12:46 PM  
 
Quick Start  
Figure C.1  
Figure D.1  
Power Switch  
Figure E.1  
3
78133331  
5
9/25/98, 12:46 PM  
 
Controls  
OSM(On-Screen-Manager) Controls  
The OSM controls on the front of the monitor function as follows:  
Control  
Main Menu  
Sub-Menu  
EXIT  
Exits the OSM controls.  
Exits to the OSM controls  
main menu.  
CONTROL  
/
Moves the highlighted  
area up/down to select  
one of the controls.  
Moves the highlighted area  
up/down to select one of the  
controls.  
CONTROL –/+  
PROCEED  
Has no function.  
Moves the bar in the + or –  
direction to increase or  
decrease the adjustment.  
Proceeds to the selected  
menu choice (indicated  
by the highlighted area).  
Activates Auto Adjust feature.  
In Display Mode, opens  
additional window.  
RESET: The currently  
highlighted control to  
the factory setting.  
Resets all the controls within  
the highlighted menu.  
Resets the highlighted control.  
NOTE: When RESET is pressed, a warning window will appear  
allowing you to cancel the reset function.  
Brightness and Contrast  
Brightness:  
Contrast:  
Adjusts the overall image and background screen brightness.  
Adjusts the image brightness in relation to the background.  
Auto Adjust Contrast: Corrects the image displayed for non-standard video inputs.  
Auto Adjust  
Allows automatic adjustment of the Position and Image Adjust controls.  
Position  
Controls horizontal and vertical image position within the display  
area of the LCD.  
Auto Adjust Position: Automatically sets the horizontal and vertical image  
position within the display area of the LCD.  
Image Adjust  
Coarse: Adjusts the horizontal size by increasing or decreasing the Coarse setting.  
Fine:  
Improves focus, clarity and image stability by increasing or  
decreasing the Fine setting.  
Auto Adjust Coarse/Fine: Automatically adjusts the Coarse or Fine settings.  
4
78133331  
6
9/25/98, 12:46 PM  
 
Controls  
AccuColorControl System  
Color presets select the desired color setting. If a setting is adjusted, the name of  
the setting will change to Custom  
.
Color Gain (Red, Green, Blue): Increases or decreases Red, Green or Blue  
color depending upon which is selected. The change in color will appear on  
screen and the direction (increase or decrease) will be shown by the color  
bars.  
OSMLocation  
You can choose where you would like the OSM control image to appear on  
your screen. Selecting OSM Location allows you to manually adjust the  
position of the OSM control menu left, right, up or down.  
OSM Turn Off Time  
The OSM control menu will stay on as long as it is in use. In the OSM Turn  
Off Time submenu, you can select how long the monitor waits after the last  
touch of a button to shut off the OSM control menu. The preset choices are  
10, 20, 30, 60 and 120 seconds.  
OSM Lock Out  
This control completely locks out access to all OSM control functions. When  
attempting to activate OSM controls while in the Lock Out mode, a screen  
will appear indicating the OSM controls are locked out. To activate the  
OSM Lock Out function, press PROCEED, then and hold down simulta-  
neously. To de-activate the OSM Lock Out, press PROCEED, then and hold  
down simultaneously.  
Display Mode  
Display Mode provides information about the current resolution display and  
technical data including the preset timing being used and the horizontal and  
vertical frequencies.  
NOTE: Mode Change should only be used if a resolution is not recognized  
by the monitor. The user can change to the appropriate resolution  
by entering the Display Mode sub-menu and selecting the  
corresponding option.  
Language Select  
OSM control menus are available in six languages.  
Factory Preset  
Selecting Factory Preset allows you to reset all OSM control settings back to  
the factory settings. The RESET button will need to be held down for several  
seconds to take effect. Individual settings can be reset by highlighting the  
control to be reset and pressing the RESET button.  
5
78133331  
7
9/25/98, 12:46 PM  
 
Recommended Use  
Safety Precautions and Maintenance  
FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE  
FOLLOWING WHEN SETTING UP AND USING  
THE MULTISYNC® LCD COLOR MONITOR:  
• DO NOT OPEN THE MONITOR. There are no user serviceable parts inside  
and opening or removing covers may expose you to dangerous shock hazards  
or other risks. Refer all servicing to qualified service personnel.  
Allow adequate ventilation around the monitor so that heat can properly  
dissipate. Do not block ventilated openings or place the monitor near a  
radiator or other heat sources. Do not put anything on top of monitor.  
Do not spill any liquids into the cabinet or use your monitor near water.  
Do not insert objects of any kind into the cabinet slots, as they may touch  
dangerous voltage points, which can be harmful or fatal or may cause electric  
shock, fire or equipment failure.  
Do not place any heavy objects on the power cord. Damage to the cord may  
cause shock or fire.  
Do not place this product on a sloping or unstable cart, stand or table, as the  
monitor may fall, causing serious damage to the monitor.  
The power cable connector is the primary means of detaching the system from  
the power supply. The monitor should be installed close to a power outlet that  
is easily accessible.  
When operating the MultiSync LCD monitor with its AC220-240V worldwide  
power supply, use a power supply cord that matches the power supply voltage of  
the AC power outlet being used. The power supply cord you use must have been  
approved by and comply with the safety standards of your country.  
Handle with care when transporting. Save packaging for transporting.  
Immediately unplug your monitor from the wall outlet and refer servicing to  
qualified service personnel under the following conditions:  
When the power supply cord or plug is damaged.  
If liquid has been spilled, or objects have fallen into the monitor.  
If the monitor has been exposed to rain or water.  
If the monitor has been dropped or the cabinet damaged.  
If the monitor does not operate normally by following operating instructions.  
6
78133331  
8
9/25/98, 12:46 PM  
 
Recommended Use  
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR  
CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE  
FOLLOWING WHEN YOU POSITION THE MONITOR:  
For optimum performance, allow 20 minutes for warm-up.  
Adjust the monitor height so that the top of the screen is at or slightly below  
eye level. Your eyes should look slightly downward when viewing the middle  
of the screen.  
Position your monitor no closer than 16 inches and no further away than  
28 inches from your eyes. The optimal distance is 21 inches for the  
MultiSync® LCD 400Vmonitor.  
Rest your eyes periodically by focusing on an object at least 20 feet away.  
Blink often.  
Position the monitor at a 90° angle to windows and other light sources to  
minimize glare and reflections. Adjust the monitor tilt so that ceiling lights do  
not reflect on your screen.  
If reflected light makes it hard for you to see your screen, use an anti-glare filter.  
Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using  
any cleaning solution or glass cleaner!  
Adjust the monitor’s brightness and contrast controls to enhance readability.  
Use a document holder placed close to the screen.  
Position whatever you are looking at most of the time (the screen or  
reference material) directly in front of you to minimize turning your head  
while you are typing.  
Avoid displaying fixed patterns on the monitor for long periods of time to avoid  
image persistence (after-image effects).  
Get regular eye checkups.  
For more detailed information on setting up a healthy work environment, call NEC  
at (800) 820-1230, NEC FastFactsinformation at (800) 366-0476 and request  
document #900108 or write the American National Standard for Human Factors  
Engineering of Visual Display Terminal Workstations – ANSI-HFS Standard  
No. 100-1988 – The Human Factors Society, Inc. P.O. Box 1369, Santa Monica,  
California 90406.  
7
78133331  
9
9/25/98, 12:46 PM  
 
Specifications  
Monitor  
MultiSync® LCD400V™  
Notes  
Specifications  
LCD Module  
Monitor  
14.1 inch  
14.1 inch  
1024 x 768  
Diagonal:  
Active matrix; thin film transistor (TFT)  
liquid crystal display (LCD); 0.28 mm dot  
pitch; 200cd/m2 white luminence;  
150:1 contrast ratio, typical  
Viewable Image Size:  
Native Resolution (Pixel Count):  
Input Signal  
Video:  
Sync:  
ANALOG 0.7 Vp-p/75 Ohms  
Separate sync. TTL Level  
Horizontal sync. Positive/Negative  
Vertical sync. Positive/Negative  
Composite sync. (Positive/Negative) (TTL Level)  
Sync on Green video (Positve) 0.7 Vp-p and sync.  
Negative 0.3 Vp-p  
Display Colors  
Analog input:  
Unlimited number of colors  
Depends on display card used.  
Synchronization  
Range  
Horizontal:  
Vertical:  
24.8 kHz to 60 kHz  
56.2 Hz to 85.1 Hz  
Automatically  
Automatically  
Resolutions Supported  
720 x 400: VGA text  
Some systems may not support  
all modes listed.  
Resolution based on horizontal and  
vertical frequencies only  
640 x 480* at 60Hz to 85Hz  
800 x 600* at 56Hz to 85Hz  
832 x 624* at 75Hz  
1024 x 768 at 60Hz to 75Hz .................... NEC cites recommended resolution at  
60 Hz for optimal display performance.  
Active Display Area  
Horizontal:  
Vertical:  
286 mm/11.3 inches  
214 mm/8.4 inches  
Dependent upon signal timing used,  
and does not include border area.  
Power Supply  
Current Rating  
Dimensions  
AC 100 – 120 V/220 – 240 V @ 50/60 Hz  
0.7A @ 100  
120 V/0.4 A @ 220 – 240 V  
357 mm (W) x 362 mm (H) x 168 mm (D)  
14.1 inches (W) x 14.3 inches (H) x 6.7 inches (D)  
Weight  
5 kg  
11 lbs  
Environmental Considerations  
Operating Temperature:  
Humidity:  
5°C to +35°C/41°F to 95°F  
30% to 80%  
Feet:  
0 to 10,000 Feet  
Storage Temperature:  
Humidity:  
-10°C to +60°C/14°F to 140°F  
10% to 85%  
Feet:  
0 to 45,000 Feet  
*
Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may  
appear choppy or lines may appear to be bold. This is normal and necessary for all current flat panel technologies when  
displaying non-native resolutions full screen. In flat panel technologies, each dot on the screen is actually one pixel, so to  
expand resolutions to full screen, an interpolation of the resolution must be done. When the interpolated resolution is not  
an exact multiple of the native resolution, the mathematical interpolation necessary may cause some lines to appear thicker  
than others.  
NOTE: Technical specifications are subject to change without notice.  
8
78133331  
10  
9/25/98, 12:46 PM  
 
Features  
Analog Advantage: Capable of displaying unlimited colors in a continuous  
spectrum, providing a truer representation of color. The monitor’s high contrast  
LCD enhances color vibrancy and improves focus with no geometric distortion.  
Wider Compatibility: Because the MultiSync LCD monitor is analog through and  
through, it does not require special analog to digital display or interface cards  
but can accept RGB input directly.  
Reduced Footprint: Provides the ideal solution for environments requiring  
superior image quality but with size and weight limitations. The monitor’s small  
footprint and low weight allow it to be moved or transported easily from one  
location to another.  
AccuColor® Control System: Allows you to adjust the colors on your screen and  
customize the color accuracy of your monitor to a variety of standards.  
OSM(On-Screen Manager) Controls: Allow you to quickly and easily adjust all  
elements of your screen image via simple to use on-screen menus.  
ErgoDesign® Features: Enhance human ergonomics to improve the working  
environment, protect the health of the user and save money. Examples include  
OSM controls for quick and easy image adjustments, tilt/swivel base for pre-  
ferred angle of vision, small footprint and compliance with MPRII guidelines for  
lower emissions.  
Plug and Play: The Microsoft® solution with the Windows®95 operating system  
facilitates setup and installation by allowing the monitor to send its capabilities  
(such as screen size and resolutions supported) directly to your computer, auto-  
matically optimizing display performance.  
IPM(Intelligent Power Manager) System: Provides innovative power-saving  
methods that allow the monitor to shift to a lower power consumption level when  
on but not in use, saving two-thirds of your monitor energy costs, reducing  
emissions and lowering the air conditioning costs of the workplace.  
Multiple Frequency Technology: Automatically adjusts monitor to the display  
card’s scanning frequency, thus displaying the resolution required.  
FullScanCapability: Allows you to use the entire screen area in most resolu-  
tions, significantly expanding image size.  
OSM Display Screen Copyright 1997 by NEC Technologies, Inc.  
9
78133331  
11  
9/25/98, 12:46 PM  
 
Troubleshooting  
No picture  
The signal cable should be completely connected to the display card/computer.  
• The display card should be completely seated in its slot.  
• Power Switch and computer power switch should be in the ON position.  
• Check to make sure that a supported mode has been selected on the display  
card or system being used. (Please consult display card or system manual to  
change graphics mode.)  
• Check the monitor and your display card with respect to compatibility and  
recommended settings.  
• Check the signal cable connector for bent or pushed-in pins.  
Image persistence  
• Image persistence is when a “ghost” of an image remains on the screen even  
after the monitor has been turned off. Unlike CRT monitors, LCD monitors’  
image persistence is not permanent. To alleviate image persistence, turn the  
monitor off for as long as an image was displayed. If an image was on the  
monitor for one hour and a ”ghost” of that image remains, the monitor  
should be turned off for one hour to erase the image.  
NOTE: As with all personal display devices, NEC Technologies recommends  
using a screen saver at regular intervals whenever the screen is idle.  
Image is unstable, unfocused or swimming is apparent  
• Signal cable should be completely attached to the computer.  
• Use the OSM Image Adjust controls to focus and adjust display by  
increasing or decreasing the fine total. When the display mode is changed,  
the OSM Image Adjust settings may need to be re-adjusted.  
• Check the monitor and your display card with respect to compatibility  
and recommended signal timings.  
LED on monitor is not lit (no green or amber color can be seen)  
• Power Switch should be in the ON position and power cord should  
be connected.  
• Make certain the computer is not in a power-saving mode (touch the  
keyboard or mouse).  
Display image has a green cast to it  
• Open OSM Display Mode and press the “+” Control button.  
Display image is not sized properly  
• Use the OSM Image Adjust controls to increase or decrease the Coarse total.  
• Check to make sure that a supported mode has been selected on the display  
card or system being used. (Please consult display card or system manual to  
change graphics mode.)  
Selected resolution is not displayed properly  
• Use OSM Display Mode to enter Mode Change sub-menu and confirm that  
the appropriate resolution has been selected. If not, select corresponding  
option.  
10  
78133331  
12  
9/25/98, 12:46 PM  
 
References  
• BBS  
(508) 635-4706  
NEC Technologies’ Remote Bulletin Board System is an electronic service  
accessible with your system and a modem. Communication parameters  
are: 300/1200/2400/9600/14.4k/28.8k/33.6k bps, no parity, 8-data bits,  
1 stop bit  
• Customer Service/  
Technical Support  
Fax  
(800) 632-4662  
(508) 635-4298  
• Electronic Channels:  
Internet e-mail: [email protected]  
Internet ftp site: ftp.nectech.com  
CompuServe: go NECTECH  
America Online: keyword NECTECH  
World Wide Web: http://www.nec.com  
• FastFacts™ Information  
INFORMATION  
MultiSync® LCD400Vmonitor  
(800) 366-0476  
DESCRIPTION  
DOCUMENT #  
142201  
Detailed monitor information  
Glossary  
Definition of terms related  
to functions, features and  
installation of the  
900203  
MultiSync monitor  
More Information  
Names and addresses of  
other groups involved in  
standards and features of  
the MultiSync monitor  
900204  
Macintosh Connection  
Detailed information on  
connecting the MultiSync  
monitor to a Macintosh  
153006  
900108  
Healthy Work Environment  
Detailed information on  
setting up a healthy work  
environment  
• Literature & Sales Info  
• MultiSync Fulfillment  
(800) NEC-INFO [(800) 632-4636]  
(800) 820-1230  
[For software & accessories]  
• TeleSales  
(800) 284-4484  
11  
78133331  
13  
9/25/98, 12:46 PM  
 
Limited Warranty  
NEC Technologies, Inc. (hereinafter “NECTECH”), warrants this Product to be free from defects  
in material and workmanship and, subject to the conditions set forth below, agrees to repair or  
replace any part of the enclosed unit, other than the LCD backlight, which proves defective for  
a period of three (3) years from the date of first consumer purchase. The LCD backlight is  
warranted for a period of one (1) year. Spare parts are warranted for ninety(90) days.  
This warranty gives you specific legal rights and you may also have other rights which vary  
from state to state. This warranty is limited to the original purchaser of the Product and is not  
transferable. This warranty covers only NECTECH-supplied components. Service required as  
a result of third party components is not covered under this warranty. In order to be covered  
under this warranty, the Product must have been purchased in the U.S.A. or Canada by the  
original purchaser. This warranty only covers Product distributed in the U.S.A. or Canada by  
NECTECH. Any use or installation outside of the U.S.A. or Canada will void this warranty.  
Proof of Purchase will be required by NECTECH to substantiate date of purchase. Such proof  
of purchase must be an original bill of sale or receipt containing name and address of seller,  
purchaser, and the serial number of the product.  
It shall be your obligation and expense to have the Product shipped, freight prepaid, or  
delivered to the authorized reseller from whom it was purchased or other facility authorized  
by NECTECH to render the services provided hereunder in either the original package or a  
similar package affording an equal degree of protection. All Products returned to NECTECH  
for service MUST have prior approval, which may be obtained by calling (800) 632-4662.  
The Product shall not have been previously altered, repaired, or serviced by anyone other  
than a service facility authorized by NECTECH to render such service, the serial number  
oftheproductshallnothavebeenalteredorremoved. Inordertobecoveredbythiswarranty,  
the Product shall not have been subjected to displaying of fixed images for long periods of  
timeresultinginimagepersistence(afterimageeffects), accident, misuseorabuseoroperated  
contrary to the instructions contained in the User’s Manual. Any such conditions will void this  
warranty.  
NECTECH SHALL NOT BE LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL,  
OR OTHER TYPES OF DAMAGES RESULTING FROM THE USE OF ANY NECTECH  
PRODUCTOTHERTHANTHELIABILITYSTATEDABOVE. THESEWARRANTIESAREINLIEUOF  
ALL OTHER WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE  
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR THE  
LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL  
DAMAGES SO THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU.  
This Product is warranted in accordance with the terms of this limited warranty. Consumers  
are cautioned that Product performance is affected by system configuration, software, the  
application, customer data, and operator control of the system, among other factors. While  
NECTECH Products are considered to be compatible with many systems, specific functional  
implementation by the customers of the Product may vary. Therefore, suitability of a Product  
for a specific purpose or application must be determined by consumer and is not warranted  
by NECTECH.  
For the name of your nearest authorized NECTECH service facility, contact NECTECH  
at (800) 632-4662.  
13  
78133331  
14  
9/25/98, 12:46 PM  
 
NEC LCD Series  
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER  
The information disclosed in this document, including all designs and related materials, is the valuable property of NEC  
Technologies and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this  
document, including all design, manufacturing, reproduction, use and sales rights thereto, except to the extent said rights  
are expressly granted to others.  
The NEC Technologies product(s) discussed in this document are warranted in accordance with the terms of the Limited  
WarrantyStatementaccompanyingeachproduct.However,actualperformanceofeachsuchproductisdependentupon  
factors such as system configuration, customer data and operator control. Since implementation by customers of each  
product may vary, the suitability of specific product configurations and applications must be determined by the customer  
and is not warranted by NEC Technologies.  
To allow for design and specification improvements, the information in this document is subject to change at any time  
without notice. Reproduction of this document or portions thereof without prior approval of NEC Technologies is  
prohibited.  
DECLARATION OF CONFORMITY  
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may  
not cause harmful interference, and (2) this device must accept any interference received, including interference that may  
cause undesired operation.  
U.S. Responsible Party: NEC Technologies, Inc.  
Address:  
1250 North Arlington Heights Road  
Itasca, Illinois 60143-1298  
(630) 775-7900  
Tel. No.:  
Type of Product:  
Equipment Classification:  
Model:  
Computer Monitor  
Class B Peripheral  
LA-1422JMW  
We hereby declare that the equipment specified above  
conforms to the technical standards as specified in the FCC Rules.  
MultiSyncisaregisteredtrademarkofNECTechnologies, Inc. intheU.S. andofNECHomeElectronics, Ltd. inCanada, UK, Germany, France,  
Spain, Italy, Austria, Benelux, Switzerland, Denmark, Finland, Norway and Saudi Arabia. AccuColor and ErgoDesign are registered  
trademarks of NEC Technologies, Inc. in the U.S. and Canada. LCD400V, IPM, FastFacts, FullScan and OSM are trademarks of NEC  
Technologies, Inc. in the U.S. NEC is a registered trademark of NEC Corporation Copyright 1997 by NEC Technologies, Inc. OSM Display  
ScreensCopyright 1997byNECTechnologies,Inc.WindowsisaregisteredtrademarkofMicrosoftCorporation.Allotherbrandsandproduct  
names are trademarks or registered trademarks of their respective owners.  
As a Energy Star Partner, NEC Technologies has determined that this product meets the Energy Star guidelenes for energy efficiency.  
The Energy Star emblem does not represent EPA endorsement of any product or service.  
NEC Technologies, Inc.  
1250 North Arlington Heights Road  
Itasca, Illinois 60143-1248  
Part No. 78133331  
Printed in Japan  
78133331  
16  
9/25/98, 12:46 PM  
 

Mustang Survival Life Jacket MA7214 User Manual
NCR All in One Printer 7883 User Manual
Nintendo Video Games 658A61A User Manual
Northern Industrial Tools Welding System 164612 User Manual
Oregon Scientific Cordless Telephone OS6976 User Manual
Oregon Scientific Radar Detector RMS600 RM600A User Manual
Panasonic Network Card 2SC6036G User Manual
Panasonic Network Card MAS3132DG User Manual
Panasonic Telephone KX TG2583B User Manual
Paragon Furnace W13 User Manual