Musical Fidelity Power Supply V PSUII User Manual

V-PSUII Power Supply Unit  
This product has been tested to ensure that  
its operation is not adversely affected by  
Thank you for purchasing the V-PSUII power normal background levels of Radio  
supply unit. We sincerely hope that it will Frequency Interference (R.F.I.), and that it  
bring you many years of outstanding does not itself generate excessive amounts  
Instructions  
Introduction  
listening pleasure.  
of interference. However, if  
a
problem  
persists, please contact your Musical Fidelity  
agent.  
Installation Precautions  
Your new V-PSUII is designed and built to Never open the case of the  
V-PSUII  
provide trouble-free performance, but as with yourself, as this will invalidate the guarantee.  
all electronic devices, it is necessary to Place all connecting cables where they are  
observe a few precautions:  
not likely to be walked on or trapped by  
Do not use the V-PSUII near water. The unit items placed on them.  
must not be exposed to dripping or splashing The V-PSUII will operate in accordance with  
and no objects filled with liquids, such as its specifications within the following  
vases, must be placed on the unit.  
environmental range:  
Keep the V-PSUII away from heat such as  
radiators. No naked flame sources, such as Temperature 5 to 45 degrees Celsius  
lighted candles, should be placed on the Humidity 10 to 90% non condensing  
unit.  
There are no user adjustments inside.  
Please refer all service work to an  
authorised Musical Fidelity agent.  
Connections  
Front and back connections  
All connections must be made before the mains adaptor is  
plugged in, and before any amplifier connected is switched  
on. Always switch off the V-PSUII (and connected amplifiers  
etc) before connecting/disconnecting power, or changing  
leads.  
Power output sockets  
and indicator LEDs  
Power Inputs  
Using figure-8 moulded mains lead (supplied), connect the  
V-PSUII to a mains socket.  
Power Outputs  
Using 1.3mm DC plug to plug lead(s) (supplied), connect  
the V-PSUII 12VDC OUTPUTS to the V-series units as  
required.  
Use  
Connect up the V-series components audio inputs and  
outputs as required.  
Switch on the V-PSUII using the rocker switch next to the  
mains input socket.  
The three individual output LEDs should light indicating  
presence of power at the respective output.  
Switch on attached components (amplifiers etc).  
Turn the volume on amplifier to normal listening levels, sit  
back and enjoy the music.  
These products have been designed so that it may be left  
on indefinitely, but please note that the V-PSUII may  
become warm to the touch - this is normal.  
Power switch  
Power input socket  
Note: The V-PSUII can also be used to power older V-series  
components.  
 

Miele Cooktop KM 342G User Manual
Miele Dishwasher 06 868 521 User Manual
Miele Washer Dryer W 1513 User Manual
MotoSAT Stereo System Antenna User Manual
Mr Coffee Coffeemaker Urt85 User Manual
Nikon Film Camera 1713 User Manual
NordicTrack Treadmill NTL10941 User Manual
NuTone Ventilation Hood 770F User Manual
Omnimount Indoor Furnishings 10081 User Manual
Panasonic DVD Player DVD LS84 User Manual